Determination of Cyanide concentration in process water
The determination of total cyanides in electroplating process water is essential for monitoring plant efficiency and ensuring environmental safety. It is a key parameter for assessing the need for abatement treatments prior to discharge, in line with current regulations.
Method
Test type: End Point.
Time testing: immediate reading.
Analysis sessions with multiple samples are possible up to a maximum of 16 tests for CDR GalvanLab®.
Sample treatment
The sample must be diluted.
Test principle
The content of cyanides is determined, after dilution, by reaction with a chromogen. The test has a total duration of 10 minutes at the end of which the signal related to the colored complex formed is detected.
Calibration curve
The calibration curve was obtained by correlating the CDR method with the reference method.
Measuring range
| Analyses | Measuring range | Resolution | Repeatability |
|---|
Reagent test Kits
The chemical analysis instrument for electroplating baths
CDR GalvanLab®
Complete analysis panel, supplied already configured
Up to 16 determinations simultaneously
Possibility of carrying out analyses of the same sample
Integrated printer
Full connections (LAN - USB - Bluetooth barcode/QR code reader)
