Determination of Sulfate concentration in process water
Sulfate analysis allows for quick and easy monitoring of the analyte concentration present in process water. Sulfate monitoring is critical to preserving process quality and optimizing operational efficiency.
Method
Test type: End Point.
Time testing: 1 minute
Analysis sessions with multiple samples are possible up to a maximum of 16 tests for CDR GalvanLab®.
Sample treatment
Use water as it is.
Test principle
Sulfate ions react with the chromogen in the reagent and generate colored complexes whose absorbance is proportional to the concentration of the analyte in the sample.
Calibration curve
The calibration curve was constructed using standard sulfate solutions. The trend of the curve confirmed an excellent linearity of the system over the whole measuring range.
Measuring range
| Analyses | Measuring range | Resolution | Repeatability |
|---|---|---|---|
| Sulfate [10-250] mg/L | 10 - 250 mg/L | 1.000 mg/L | 7 mg/L |
Reagent test Kits
Code *400120: 100 test
Code *400125: 10 test
The reagents have a shelf-life of 12 months
The chemical analysis instrument for electroplating baths
CDR GalvanLab®
- Complete analysis panel, supplied already configured
- Up to 16 determinations simultaneously
- Possibility of carrying out analyses of the same sample
- Integrated printer
- Full connections (LAN - USB - Bluetooth barcode/QR code reader)
